Gas light entities - still make noise once extinguished.

[Bikerdude]

I think... I fixed this by making a custom entities for BCD when I came across this issue, but in case I didn't does anyone else know fix this?

Edited October 9, 2018 by Bikerdude

[ERH+]

Looking from technical side, if you turn it off it shouldn't, but if you dose it with a water arrow - the flammable fumes will keep going...

Edited October 10, 2018 by ERH+

[Bikerdude]

Hmm I have sent them to be extinguished in DR, so they shouldn't be on or making a sound.

[Obsttorte]

What entity are you using?

[Bikerdude]

What entity are you using?

atdm:lamp_wall_gasflame03_lit

[Bikerdude]

bump..

[VanishedOne]

Maybe the problem is that it's the atdm:lamp_wall_gasflame03_lit entity (which is an idStaticEntity) that has an s_shader set, not the light_gasflame attachment (which is the actual light entity)?

[Bikerdude]

Maybe the problem is that it's the atdm:lamp_wall_gasflame03_lit entity (which is an idStaticEntity) that has an s_shader set, not the light_gasflame attachment (which is the actual light entity)?

Some of the electric lights have the shader applied that way and they stop making sounds when turned off, so its must be an issue with the entity definition for the gas light.

Edited October 16, 2018 by Bikerdude

[VanishedOne]

Some of the electric lights have shader applied that was and they stop making sounds when turned off, so its must be an issue with the entity definition for the gas light.

Do those electric lights have idStaticEntity spawnclasses or idLight spawnclasses? atdm:wall_sphere_lit for example is an idLight entity. Whereas atdm:lamp_wall_gasflame03_lit is an idStaticEntity which spawns an idLight attachment.

Edited October 16, 2018 by VanishedOne

[Obsttorte]

Some of the electric lights have the shader applied that way and they stop making sounds when turned off, so its must be an issue with the entity definition for the gas light.

Electric lights differ from gas lights and flames. While the first ones are light entities themselves, the latter one are only static objects with a light entity attached. Use the set command to alter spawnargs on attached entities or create your own entity.

[Bikerdude]

Are there plans by the team to fix this or do I need to log a tracker?