Jump to content
The Dark Mod Forums

The Darkmod on an Intel HD5500:


Bikerdude

Recommended Posts

Tested TDM 2.03 on an new laptop, Core i5-5200U, Intel HD5500, vync off, video set to normal/default and res of 1366*768

  • FPS - 20

My other laptop, Core i7-4210, nVidia 8400m, video set to normal/default and res of 1366*768

  • FPS - 24

The above was looking down the archery range in the Training mission. So it looks like Intel are getting better in the low end segment.

 

post-496-0-72876300-1433337967_thumb.jpg

Link to comment
Share on other sites

I may try to play TDM on top-end Skylake integrated graphics (> Iris Pro 6X00) later this year. I use integrated HD 6520G now.

 

https://en.wikipedia.org/wiki/Intel_HD_and_Iris_Graphics

http://wccftech.com/intel-skylake-processors-integrate-iris-gt4e-level-graphics-chip-features-72-execution-units-128-mb-edram-llc/

http://www.cpu-world.com/news_2014/2014050501_Intel_Skylake_CPUs_to_feature_GT3e_and_GT4e_graphics.html

 

Haswell

 

On 12 September 2012, Haswell CPUs were announced, with four models of integrated GPUs:
  • HD Graphics – GT1, 10 execution units, up to 184 GFLOPS at 1150 MHz
  • HD Graphics 4200, 4400, 4600, P4600, P4700 – GT2, 20 execution units, up to 432 GFLOPS at 1350 MHz
  • HD Graphics 5000 – GT3, 40 execution units, twice the performance of HD4xxx for compute-limited workloads, 15 W TDP SKUs, up to 704 GFLOPS
  • Iris Graphics 5100 – the same as HD Graphics 5000, 28 W TDP SKUs, but higher maximum frequency of 1.3 instead of 1.1 GHz,[4] up to 832 GFLOPS
  • Iris Pro Graphics 5200 – GT3e, the same as GT3 but with addition of a large 128 MB embedded DRAM (eDRAM) cache to improve performance of bandwidth-limited workloads
Broadwell
In November 2013, it was announced that Broadwell-K desktop processors (aimed at enthusiasts) will also carry Iris Pro Graphics.
The following models of integrated GPU are announced for Broadwell processors:
  • Intel HD Graphics, GT1 – 12 execution units, up to 163.2 GFLOPS at 850 MHz
  • Intel HD Graphics 5300, GT2 – 24 execution units, up to 345.6 GFLOPS at 900 MHz
  • Intel HD Graphics 5500, GT2 – 23 or 24 execution units, up to 364.8 GFLOPS at 950 MHz
  • Intel HD Graphics 5600, GT2 – 24 execution units, up to 403.2 GFLOPS at 1050 MHz
  • Intel HD Graphics 6000, GT3 – 47 or 48 execution units, up to 768 GFLOPS at 1000 MHz
  • Intel Iris Graphics 6100, GT3 – 47 or 48 execution units, up to 844.8 GFLOPS at 1100 MHz
  • Intel Iris Pro Graphics 6200, GT3e – 48 execution units with up to 128 MB of eDRAM, up to 883.2 GFLOPS at 1150 MHz
  • Intel Iris Pro Graphics P6300, GT3e – 48 execution units with eDRAM

 

Skylake
The Skylake line of processors is expected to retire VGA support. They will support up to five monitors connected via HDMI, DisplayPort or Embedded DisplayPort (eDP) interfaces.
The following models of integrated GPU are announced for Skylake processors: [citation needed]
  • GT1 – 12 execution units
  • GT1.5 – 18 execution units
  • GT2 – 24 execution units
  • GT3 – 48 execution units
  • GT3e – 48 execution units with 64 MB of eDRAM
  • GT4e – 72 execution units with 64 or 128 MB of eDRAM
Edited by jaxa
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recent Status Updates

    • OrbWeaver

      Does anyone actually use the Normalise button in the Surface inspector? Even after looking at the code I'm not quite sure what it's for.
      · 6 replies
    • Ansome

      Turns out my 15th anniversary mission idea has already been done once or twice before! I've been beaten to the punch once again, but I suppose that's to be expected when there's over 170 FMs out there, eh? I'm not complaining though, I love learning new tricks and taking inspiration from past FMs. Best of luck on your own fan missions!
      · 4 replies
    • The Black Arrow

      I wanna play Doom 3, but fhDoom has much better features than dhewm3, yet fhDoom is old, outdated and probably not supported. Damn!
      Makes me think that TDM engine for Doom 3 itself would actually be perfect.
      · 6 replies
    • Petike the Taffer

      Maybe a bit of advice ? In the FM series I'm preparing, the two main characters have the given names Toby and Agnes (it's the protagonist and deuteragonist, respectively), I've been toying with the idea of giving them family names as well, since many of the FM series have named protagonists who have surnames. Toby's from a family who were usually farriers, though he eventually wound up working as a cobbler (this serves as a daylight "front" for his night time thieving). Would it make sense if the man's popularly accepted family name was Farrier ? It's an existing, though less common English surname, and it directly refers to the profession practiced by his relatives. Your suggestions ?
      · 9 replies
    • nbohr1more

      Looks like the "Reverse April Fools" releases were too well hidden. Darkfate still hasn't acknowledge all the new releases. Did you play any of the new April Fools missions?
      · 5 replies
×
×
  • Create New...