Search the Community

A visually breaking change is planned for 2.13 (6354). Environment mapping is used when material contains a stage like this: { blend add cubeMap env/gen3 texgen reflect } Historically, there are two separate shaders for this case: one if the material has bumpmapping, and one if it does not. Note that if the material has diffuse or specular stage, then bumpmap is added implicitly. The shader with bumpmap was apparently "tweaked" by someone in TDM and got several major differences: it has fresnel term output color is tonemapped to [0..1] range using X / (1 + X) the color multiplier is hardcoded to (0.4, 0.4, 0.4) I'd like to delete all of these differences and restore the same behavior as in non-bumpmapped case. It is also the same behavior which is used in both cases in Doom 3 BFG (and supposedly in Doom 3 too). Speaking of points 1 and 2, nobody will notice the difference except in rare corner cases. The point 3 however is serious. It is also the main reason behind the change. Right now nobody can tweak the intensity of environment mapping: if you try to set red/green/blue/rgb, these settings are simply ignored. Now the problem is that the intensity of most environment mapping materials will change. In core files I see text like this (stainglass_saint_01) : { blend add maskalpha cubeMap env/gen3 // tone down the reflection a bit //I see no evidence that these values do anything red Parm0 * 0.2 green Parm1 * 0.2 blue Parm2 * 0.2 texgen reflect } Since the default parameter was 0.4, after the change this material will get 2x less intensity. The situation is even worse if rgb multiplier is not specified, since then it will change from 0.4 to 1.0, i.e. envmapping will become 2.5 times brighter. I can probably collect the list of all materials using environment mapping, but I'm not sure I'll be able to check them all one by one. Perhaps I can delete existing rgb settings, blindly set "rgb 0.4" and hope for the best.

I will have a look. No promises eh.

that´s why i will give you a patchnotes for version 0.0.7.5 (and in a vid you showed so) Okay - if German was maybe only for settings ?! - then it doesn't matter otherwise? Why eliminated? and a 2GB game with no chance to save - looks ambitious to me Of course - the biggest part will be the engine! - but the game itself ? I'm going to take up the challenge and definitely : I'm going to have a lot of fun ( sure : it's not just "girls that want to have fun" ) CU ! Edit (24.04) Ohhh : I see (no save needed)

I just stumbled across this comment from @stgatilov and was wondering if the GUI-based debrief was implemented. Turns out is wasn't, so consider this an official feature request My own requirements aren't terribly complicated - just the ability to either: display a page or pages similar to the briefing show just a custom image (e.g. a newspaper article or something) display a readable like in the game (again the newspaper example works here). Not sure if it should display before the stats screen or after? I've only put about 2 minutes of thought into this, so I imagine others will have more to add. Also, I'm scared of working with GUI files, so making it as simple as possible would be great (especially if it's just to display an image).

As a matter of fact, I implemented passing info from briefing to game and from game to debriefing: https://bugs.thedarkmod.com/view.php?id=6509#c16671 At some moment I think I should put this info to wiki... This will be available in the future dev build. P.S. By the way, you can also override which .map file to start, although I'm very skeptical that this feature is worth the trouble you'll get in maintainability. Small variations of the same map should be better implemented by writing the "main" game script.

Alright, so, I'm a Texture Artist myself for more than 20 years, which means I know what I'm talking about, but my word isn't law at all, remember that. I've worked (mostly as mods, I am a professional but I much prefer being a freelance) with old DX8 games up to DX12. When it comes to Detail Textures, for my workflow, I never ever use it except rarely when it's actually good (which, I emphasize on "rarely"). This is one reason I thought mentioning that I worked with DX8 was logical. One of the few times it's good is when you make a game that can't have textures higher than what would be average today, such as, World Textures at 1024x1024. Making detail textures for ANY (World, Model) textures that are lower than 128x128 is generally appealable. Another is when the game has no other, much better options for texturing, such as Normal Maps and Parallax Mapping. Personally, I think having Detail Textures for The Dark Mod is arguably pointless. I know TDM never had a model and texture update since 2010 or so, but most textures do seem to at least be 1024x1024, if there's any world texture that's lower than 256x256, I might understand the need of Detail Textures. Now, if this was a game meant to be made in 2024 with 2020+ standards, I would say that we should not care about the "strain" high resolution textures add, however, I do have a better proposition: Mipmaps. There are many games, mostly old than new ones, that use mipmaps not just for its general purpose but also to act as a "downscaler". With that in mind, you boys can add a "Texture Resolution" option that goes from Low to High, or even Lowest to Highest. As an example, we can add a 2048x2048 (or even 4096x4096) world texture that, if set to Lowest, it would use the smallest Mipmap the texture was made with, which depends on how the artist did it, could be a multiplication of 1x1 or 4x4. One problem with this is that, while it will help in the game with people who have less VRAM than usual these days, it won't help with the size. 4096x4096 is 4096x4096, that's about 32mb compressed with DXT1 (which is not something TDM can use, DXT is for DirectX, sadly I do not know how OpenGL compresses its textures). I would much rather prefer the option to have better, baked Normal Maps as well as Parallax Mapping for the World Textures. I'm still okay with Detail Textures, I doubt this will add anything negative to the game or engine, very sure the code will also be simple enough it will probably only add 0.001ms for the loading times, or even none at all. But I would also like it as an option, just like how Half-Life has it, so I'm glad you mentioned that. But yet again, I much prefer better Normal Maps and Parallax Mapping than any Detail Textures. On another note...Wasn't Doom 3, also, one of the first games that started using Baked Normal Maps?

The translation pack has the german string in the base pack rather than in the fm subfolder. I will fix it in the mission database. Edit: Fixed in the mission db Edit 2: Nope. Not exactly fixed. It seems that lang files in the mission string folder need to be "complete" because they fully override the core strings. If I am correct, this was broken in 2.11 when we permitted in-file overrides of core files in missions. Edit 3: Still broken in 2.10, rolling back to 2.07 Edit 4: Still broken in 2.07. Something has gotta be wrong with the translation specific to this mission. Edit 5: The core mission XD files don't use the strings so nothing happens if the lang files are in the strings/fm subfolder. Probably means that the translation packs "never worked" for many missions unless impacted players sought out special editions of the missions on Tels' server. What a mess. Fuzzy recollection time: I think Tels was trying to push the team to mass convert all missions to move XD data into strings/fm/english.lang but nobody wanted to broach it and even mission authors weren't happy about this way of handling things. If the translation pack takes precedence, the best way forward is to include the converted XD file into it. Testing... Edit 6: Couldn't get the XD update to work, so I decided to checkout Darkfate's version. It works flawlessly. I copied their pack into the standard translation pack and the added string files for the other languages worked as well. Darkfate's packs include map files so I'll need to study whether we can avoid that. Otherwise we are basically doubling our mission db or "damaging" our hosted versions to make them translatable. Since this mission is so small and probably will never be edited again we can probably use darkfate's version as-is.

Thought it would be a good idea to collate a useful list for new and old mappers alike and this post will update as we go. Abandoned works: Any WIP projects that were abandoned by the original author - http://forums.thedarkmod.com/topic/12713-abandoned-works/ Darkradiant & Darkmod shortcut settings: Some example settings for new mappers - http://forums.thedarkmod.com/topic/15152-darkradiant-and-darkmod-shortcut-folder-settings/ Darkradiant howto, must knows, tips and faqs - http://forums.thedarkmod.com/topic/12558-usefull-important-editing-links/?do=findComment&comment=272581 Info for Beginners: Newbie DarkRadiant Questions - http://forums.thedar...iant-questions/ Dark Radient Must Know Basic Intro - http://wiki.thedarkm...now_Basic_Intro Editing Tips for Beginners - http://wiki.thedarkm...s_for_Beginners Editing FAQ (Troubleshooting & How-To) - http://wiki.thedarkmod.com/index.php?title=Editing_FAQ_-_Troubleshooting_%26_How-To Sotha's excellent Mapping Tutorial series: http://forums.thedarkmod.com/topic/18680-lets-map-tdm-with-sotha-the-bakery-job/ Springheel's New Mapper's Workshop: http://forums.thedarkmod.com/topic/18945-tdm-new-mappers-workshop/ Inspiration: Collection of screenshots and images people have found online - http://forums.thedarkmod.com/topic/11610-darkmod-inspiration-thread/ Mapping Resources: List of Voice actors available for voice recording - http://modetwo.net/d...6-voice-actors/ Lengthy collection of city reference pictures - http://modetwo.net/d...rence-pictures/ Collection of texture resource sites - http://modetwo.net/d...ture-resources/ Free Ambient Tracks - http://skeksisnetlabel.wordpress.com/2009/12/30/10-songs-for-free-download-vol-10-full-moon-over-noricum/ Mapping Tools: 3 useful tools for texture creation - http://forums.thedarkmod.com/topic/18581-must-have-tools-for-the-descerning-mapper/ Modular Building: What is Modular building - http://forums.thedarkmod.com/topic/14832-modular-building-techniques/ Working example tutorial on modular building - http://forums.thedarkmod.com/topic/18680-lets-map-tdm-with-sotha-the-bakery-job/ Springheels new modular models - http://forums.thedarkmod.com/topic/18683-using-springheels-205-modules/ Some related mapper recipies - Easy Vaults - http://forums.thedarkmod.com/topic/14859-easy-vault-recipe/?hl=%2Beasy+%2Brecipe Easy Outdoors - http://forums.thedarkmod.com/topic/16159-easy-outdoors-recipe/?hl=%2Beasy+%2Brecipe Easy Caverns - http://forums.thedarkmod.com/topic/14469-quick-caverns-recipe/?hl=recipe Easy Alert Ai - http://forums.thedarkmod.com/topic/17157-easy-alert-ai-recipe/?hl=%2Beasy+%2Brecipe Easy Alert Ai Custom Behavour - http://forums.thedarkmod.com/topic/17160-easy-alert-ai-custom-behavior-recipe/?hl=recipe Tutorials: Collection of video tutorials for DR - http://modetwo.net/d...in-darkradiant/ Using Lighting and detail effectively: - http://forums.thedar...l-and-lighting/ Voice Actors list: List of available voice actors - http://forums.thedarkmod.com/topic/12556-list-of-available-voice-actors/ Usefull Console commands: A list of console commands for testing in-game - http://wiki.thedarkm...Useful_Controls

Well if you go to the mission downloader again, it will show a new update for the mission, which is the translation pack. If I select Germain language and activate The Outpost, TDM will not start anymore (2.13 dev)

As of 09e5ec1cae16b8350097fc97839de64cf96c4e88 I have changed the logic to write spawnargs if EITHER the speaker radii are different from the shader default, OR if there were min/max spawnargs to begin with. Spawnargs will no longer be created (or deleted) as a result of a speaker move, but will appear and change if the speaker is resized, which I assume is closer to the expected behaviour.

Also, related to font improvement, I've just released "ExportFontToDoom3All256", a reconstruction of an earlier but now lost tool variant. This is described and available in the wiki article ExportFontToDoom3 I tested that tool using one of the TDM FM fonts, Andrew Script, for which a TTF file is available. I generated a fresh set of bitmaps (newly including any available Latin-1 characters). I also mucked about with FontForge, to reconfigure that TTF to be ordered like the TDM custom codepage. However, Andrew Script is missing a fair number of Latin-1 glyphs, so it would take some work to make it good (whether by editing in FontForge or post-export as bitmaps). I'm putting that aside for now, since the jury is out on whether Western language support in FMs and their fonts will become viable (see Western language support in 2024?). Instead, I plan to turn my font-improvement-for-2.13 attention to Stone 24pt, which (because its used in HUD captions) is more clearly worthwhile to work on. Looks like I'll have to convert the Stone DDS to TGA as a prerequisite to bitmap editing.

Well, the 7600 XT is considered sus for putting 16 GB on 128-bit, but it clearly works in some scenarios. Also IIRC GDDR7 will have about +30% bandwidth over GDDR6X right out of the gate, rising to about +100% as the generation progresses. Big caches (Infinity Cache L3 for AMD, lots of L2 for Nvidia) have made smaller bus widths more viable, and I think they have improved compression techniques and other factors over time to help alleviate bandwidth demands. There's already a little bit of analysis of what we can expect to see in RDNA3+ and RDNA4, very technical though: https://chipsandcheese.com/2024/02/04/amd-rdna-3-5s-llvm-changes/ I am eager to see if AMD is bold enough to do (or allow AIBs to put) 32 GB on the top RDNA4 card, which has long been rumored to be slower than the 7900 XTX in raster, but will hopefully beat it in raytracing and other areas such as AI/ML perf. And I think that card will have a 256-bit bus and 16 GB memory normally.

@The Black Arrow That's a good analysis. I don't disagree but we're referring to different time periods with different quality aims: In the early days of 3D and low-res CRT screens when we had 256x256 textures, detail textures were used to make surfaces appear as if they have 1024x1024 textures... today in the age of 1080p monitors such texture can appear blurry from up close, we want to make 1024x1024 textures appear of 4096x4096 quality. Back then the goal was to get at least a little bit of perceived sharpness, today the goal is to see those microscopic details on every surface as if everything is real... while the concept of detail textures is old it scales to cover both aims. As you correctly pointed out, the ideal solution would be upgrading the actual textures themselves. Sadly there are two big problems with this that will likely never be possible to overcome: Someone must create or find identical textures to replace existing ones, which have to retroactively fit every old FM. That would be a huge effort for so many images, and will not look exactly the same way so people would complain how "this wall used to be made of small red bricks which are now larger and yellower which isn't what I intended and no longer line up". An advanced upscaling filter may be able to bump the resolution with good results, this would be a lot less effort and retain the exact appearance of textures. The even greater issue is storage and memory use would go through the roof. Imagine all our textures (from surfaces to entity skins) being 4096x4096 which would be the aim for decent quality today: TDM could take over 100 GB of drive space, you'd need at least 16 GB of RAM to run it, and the loading time of a FM will be 5 minutes. Detail textures are a magic solution for both problems: They're overlayed in realtime on top of the standard textures without changing their base appearance. This means you see pixels several times the scale of the image without requiring any image to actually be at that resolution, no vRAM or loading time increase. And if detail layers are disabled with distance you also don't lose FPS in per-pixels calculations when distant lights update.

If it's supposed to be an octagon, I don't think the corners need to be bevelled. Certainly it looks much better to bevel square corners, but the angles of an octagon don't look bad imo. If you want a smooth cylinder though, the default cylinder patch has 16 sides, which looks smooth enough in game. That would be easier than bevelling 8 corners. Speaking of smoothing; I was pleasantly surprised to find that if you make a model in Blender with smooth-shading ticked, then export an ase file, it will retain the smooth shading when imported to darkradiant.

Query: when playing a level, how sharp must a corner in the level geometry be for it to look bad to you? I'm sculpting my current FM from scratch as there aren't many prefab modules fitting my theme and the question has been nagging me for a bit. I've been using bevel patches to smooth out 90 degree corners made of brickwork for a slightly more realistic look to them, but I'm not sure where else I should be smoothing out the angles of my level geometry. Most notably I have a larger room where the main center piece is a large octagonal tower made of brick and I'm unsure if players will find its sharp angles unappealing to look at despite its ornamentation. Try as I might to smooth out those corners, an octagon is still an octagon.

Snatcher, so is this part of your modpack already or will it be integrated when most items have been named?

Are you going to build two separate missions knowing that player will only see one of them? I think this is "cool in theory", but in reality using such a feature requires tremendous amount of work from mapper, so nobody will use it.

looks like nvidias upcomming blackwell 5xxx cards will use hbm ouch i suspect prices will rise hugely if they go through with that, but they might seing as they go heavily into AI support.

sadly the upcomming 8xxx series from amd will only be for midrange atleast according to leaks (grain of salt maybe ?). well it would be something quite different thats for sure not sure if 32 gb vram would actually help (what is the max texture size today ?), it might help if they really go nuts with the detail level in upcomming titles but i suspect this might take longer as the game companies dont want to alienate players with less vram. ofc it will come at some point but i dont see it in the near future. the 2 and 3 gb vram chips might actually make a dent in the bus width war. what the hell happened with hbm memory ???, the old fury cards could actually do 4k no problem with only 4 gb vram because the hbm memory was so blazing fast.

Sixty years ago the famous deLisle family fell into ruin. The last heir of their house believes an ancient heirloom will restore their fortunes. Retrieving it should be worth braving a haunted house for... Get it from the in-game mission downloader.

He thanks for the nice words! Alot going on! Delightfyl demo 2 should be in german? Well its abondanware now You do not yet save in project SITN. I will do saving last this time, i want to focus on stability and fun first Make sure to join the discord! https://discord.com/invite/2azhNerAgM

Obviously the change will only work in last night's dev snapshot and onward. But missions can already start implementing this: It's just that older TDM versions won't see the debrief screen and only future players or dev users will enjoy them.

I'm looking for the setting that controls the number of difficulty levels in the options menu. The current "hardcore" setting is not challenging enough for me, and I'd like to make it more difficult, like this one for thief. I can edit the Darkmod.cfg file and would like to know if I can create a separate *.pk4 file with this file, removing everything unnecessary except the parameters I need. Will the game load the default settings from the game root and the additional data from my file? Of course, it would be better if you could tell me how to create an additional difficulty setting. I've searched through all the archives and couldn't find what I need. Thank you for your help.

Yes. Sure, I will change it, but I do mind. In addition to changing the forum title, I have also had the name of the pk4 changed in the mission downloader and the thiefguild.com site’s named changed. It's not just some "joke". The forum post and thread are intended to be a natural extension of the mission’s story, a concept that is already SUPER derivative of almost any haunted media story or most vaguely creepy things written on the internet in the past 10 or 15 years. Given your familiarity with myhouse.wad, you also can clearly engage with something like that on some conceptual level. Just not here on our forums? We can host several unhinged racist tirades in the off-topic section but can’t handle creepypasta without including an advisory the monsters aren’t actually under the bed? (Are they though?) I am also trying to keep an open mind, but I am not really feeling your implication that using a missing person as a framing of a work of fiction is somehow disrespectful to people who are actually gone. I have no idea as even a mediocre creative person what to say to that or why I need to be responsible for making sure nobody potentially believes some creative work I am involved in, or how that is even achievable in the first place. Anyway, apologies for the bummer. That part wasn’t intentional. I am still here. I will also clarify that while I love the game, I never got the biggest house in animal crossing either. In the end Tom Nook took even my last shiny coin.

Announcing the next installment of 'The Lieutenant' series: High Expectations! Never heard of this series before? That's because I just made it up. Actually, it continues on from my previous FM, In Plain Sight. You don't need to have played In Plain Sight before, but there are some references to it in the readables that might not make sense if you haven't (some of which will be spoiler-ish). "Follow the Lieutenant on his next mission to the City of Highborough" Mission Type: City Missions Beta Testers (thank you all!!! @wesp5 @Acolytesix @Shadow @Cambridge Spy @AluminumHaste @jaxa @thebigh @joebarnin @Mezla @snatcher @datiswous Extra credit goes to @Mezla for providing the idea behind one of the objectives! Notes: TDM 2.11 required You can explore most of the map from the start of the mission, but if you find yourself getting a bit lost or unfocused, just concentrate on the main objective Your objectives will become visible after you read your briefing in your inventory The map does not contain any secrets The only difference in the difficulties is the (optional) loot goal This mission has some replay potential built-in. Explanation below, but I suggest you read this only after your first playthrough: Spoiler warning!: Download links (v1.4): Proton Drive: https://drive.proton.me/urls/ZDTKN6DDM4#8Re0CpARxcbc Github: https://github.com/FrostSalamander/fsx/releases/download/1.4/highex.pk4 Screenshots: https://flic.kr/s/aHBqjAB8qt Known Issues it appears that to some players keys bound to AI are unfrobable. I don't have a solution as I've never been able to reproduce it. As a mitigation, for these doors you can either lockpick them or an alternate key will be available. Other hints Atkinson/Burns objective This objective is more about rewarding the 'explorer' types. It's optional and requires you to find a lot of stuff to piece together the whole story of what happened. Most of these are not really 'hidden', but rather require a visit to most of the accessible areas of the map. If you have given up searching, then: Hotel Safe Combination hint: spoiler: What's going on with Brother Gregory? If this isn't clear, then read on: There's a wooden door in the prison that I can't open... hint: spoiler: