Search the Community

After playing various Dark Mod FM’s, I become hooked to the game, like I was with Thief (and its FM’s). So, like I do to all games I love, I tried to find ways to improve it. Since my first contact with DM and after playing T1 and T2 with the fantastic “HD Mod”, it became apparent that graphically, TDM struck me strange. Of course, it is clearly a BIG improvement over T3 and it’s not worse then Thief 2014 -- if you remove all those post processing effects, the textures are actually very bad for today standards – but it could be a little bit better. So I started to change a texture here, a texture there, whenever I found a texture that could be improved. Initially, I made this for my own amusement, while i was playing, but as the changes increased, I started to think I it would only be fair to share it with the community. As a note, I really appreciate the amount of work done by the contributors to TDM. It’s amazing how an open source project of a game whose genre is unfortunately condemned to target a niche player base could attract so many talented people to work together and create what essentially is the Thief 4 we never had. So this is in no way a mean to disrespect the contributors and their work. What changed and how Currently, around 530 files were changed. The changes end up in one of the following categories: NOTE: “texture quality” noted below is subjective and represents only my point of view. Again, It is in no way a mean of disrespect for the original author and its work. The texture is good but is in a low resolution – upscale it using AI image enhancement methods. The texture is poor and low res, with poor AI upscale results – try to replace it using various free PBR or raw Image sources (1) or create my own. If necessary, adjust the image using (colors, saturation, contrast, …) The texture has a good resolution and its not quite good but can be improved – improve using gimp (ex: on textures with bur, use sharpen, noise reduction or/and other features) (2) The texture depicts an horrible stew – change it to a decent and delicious stew, because my Portuguese roots forced me to do it. Additionally, specular and normal maps were added to some textures. (1) Free textures and PBR sites already discussed on this forum (texturehaven.com, 3dtextures.me, cc0textures.com and so on). (2) Finding the right texture is not always easy. I always tried to follow the same “feel” and appearance of the original image, but i confess that this is not always the case. Again, very subjective. New version 2021.01.08 * Around 170Mb of textures processed Some tree barks enhanced Stucco change more enhancements on doors, paint paper, fire places, ground textures, curtains .. and much more Screenshots and Comparisons It’s obviously undoable to show the comparison for all changed textures, so keep in mind that the following screenshots are just a very small example of the whole project. Also, very important, keep in mind that there is so much you can do with screenshots and in game the differences are much more clear than what is shown below. Sir Talbot's Collateral https://imgsli.com/MTI2NDE https://imgsli.com/MTI2MzY https://imgsli.com/MTI2Mzc https://imgsli.com/MTI2Mzg https://imgsli.com/MTI2Mzk https://imgsli.com/MTI2NDA WS3: Cleighmoor https://imgsli.com/MTI1OTE WS1: In the North https://imgsli.com/MTI2MTY https://imgsli.com/MTI2MTc WS2: Home Again https://imgsli.com/MTI2MjM https://imgsli.com/MTI2MjQ https://imgsli.com/MTI2Mjc https://imgsli.com/MTI2Mjg https://imgsli.com/MTI2Mjk https://imgsli.com/MTI2MzE https://imgsli.com/MTI2MzM New (version 2021.01.08) Briarwood Manor https://imgsli.com/MzUwNDY https://imgsli.com/MzUwNDg https://imgsli.com/MzUwNTE https://imgsli.com/MzUwNjc The Builder's Influence https://imgsli.com/MzUxNjM https://imgsli.com/MzUxNjQ No honor among thieves: forest https://imgsli.com/MzU0ODE https://imgsli.com/MzU1NTQ https://imgsli.com/MzU1NTk How to install 1) download the pk4 file from here 2) drop it on your TDM game folder (where all the other pk4 files are) 3) Play! Uninstall Just remove z_TDM_HD.pk4 file from your TDM install folder. Disclaimer If you are a purist, please don’t use this texture mod. Don’t bash it for not being “exactly the same as the original ones but hires”. If you find some texture that is copyrighted, please let me know and i will replace it. Fell free to suggest changes, but please don't make requests. Understand that i am doing this while playing and if i start feeling that i'm working instead, i will probably start to loose my interest. PS: I really don't know if this is the right thread to make this post. Let me know if i need to change it to another thread.

Welcome to the forums Ansome! And congrats on making it to beta phase!

I love the idea of a 15th Anniversay contest, but I think there should be fewer restrictions on what type of mission can be made so that more mappers would be encouraged to join. Fewer restrictions on what kind of mission can be made for the contest would hopefully open up more room for creativity, and maybe we'll even get some weird, unconventional missions that break the status quo. I, for one, don't really have a desire to do the "connections" theme again. It was fun doing it last time, but if I were to participate in a new contest I'd like to do something different. And holding a contest for the third "Official" campaign mission is an interesting idea, but if a contest like that is to be done, I think that should be its own dedicated contest not tied to an anniversary contest.

You can't softlock by getting stuck in this game, open console type "noclip" and fly to wherever you need to. But yeah, it is a bug.

yes it only has VGA and another port but not HDMI as the HDMI cable wont fit. The picture is too large to send I'm afraid.

See this post: I wonder if it could be modified so that the set_frobable could be done when box is at a quarter of open animation. I think that this has to do with frob-distance and/or if the container where the item is in also has frob-higlight. It think that when the box is opened, frob-highlight for the box-body should be enabled. So the best would be probably: If box is closed, whole box should have frob-highlight enabled. When box is open, only lid should have frob-highlight enabled. This should be applied to all core prefabs. I also have this sometimes with messages sticking to doors, where it is very difficult to frob the message or door.

There's a bug I've been noticing for a long time, but for some reason it didn't click with me to mention it till someone else just mentioned seeing the same thing and I realized I'm not the only one. The contents of some chests and small containers like drawers will sometimes not become frobable when you open that container: You may need to close the door and open it again, after which you can frob any scrolls / keys / etc inside. Most likely something is happening with target_setfrobable getting triggered at the wrong time. Even when they are frobable, tiny items in small containers will sometimes only highlight from a very specific position and angle: I've had cases where I needed to lean forward and look at a coin just right and it would only highlight when my crosshair was on that one pixel. I'm sorry I didn't think to note down a FM and viewpos where to test it; If you need I'll keep that mind for when I play the next one. This doesn't happen a lot any might be hard to catch, but often enough as to be noticeable... in most recent FM's it seems to occur at least once in some drawer or lockbox.

Open questions for all. As a mere player, have you ever modified other games? Have you installed unofficial fixes, patches, updates, upgrades, expansions, mods? Were you happy it all was well documented? Were you happy that you could control what was being installed? Were you happy that it worked? Were you happy that you could install other stuff alongside without problems? Were you happy that you could uninstall it? Did you care about the authors or flame wars going on in obscure places of the internet? Players download stuff, sometimes read the instructions, install it and judge it. ---------------------------------- My friend Wesp5, Listen to the feedback. As a start, I would like to see the patch, or parts of it, in pk4 format. If you were to split your patch into standalone mods, which mods would you produce?

I took a quick look at the training mission and I didn't notice many changes in the first place. Some new windows on walls that didn't have them, but was something gameplay related changed? I found there are still a lot of unique items missing in the object handling section which I added in my patch for example. The main issue I have with the TDM training mission hasn't been tackled, namely that it isn't a mission at all, just a loose collection of tutorial areas. Which is fine when you want come back and re-train something, but bad if you want new players to have fun discovering TDM! Yes, the two campaign missions try to do the latter, but in other games the training/tutorial is done much better in a linear fashion (e.g. Half-Life and Opposing Force) or is even integrated in a story (Bloodlines and many others). It would probably be a lot of work, but maybe it would be possible to modify the training mission, so it represents a linear sequence in which you learn one basic principle after another while actually playing a mission that is has a story and is fun! If you really think people are going to replay it, maybe shortcuts could be added to the single areas. Right now all areas start from a central room, maybe they could be connected so that there is one way where you enter a door and go around the whole room to exit at the end? (If people agree, that the training mission should be changed, maybe we should open a new thread for this discussion.)

Hello yesterday i realised that the saving system as used now leads to loot losses i realized that when i found a small golden can for the 3rd time... I use Quick Save and Quick Load a lot, but if you save with a name you have to go to the save menu. reversed that is unfortunately equal. the saves with a name are NOT loaded with quick load... meaning that if i continue after a names save, fail a task, press quick load then my golden can WONT be loaded even while i EXPLICITLY saved that after the second find ...... could you PLEASE stop this annoying process of makeing double effort ?? its nice to have the Quick save, but it breaks the game for real that the quick load cannot load the LAST SAVE .... very annoying and very pitty and not needed at all. hope its very simple to implement. cheers.

We are proud to announce the release of: The Dark Mod 2.12 ! The 2.12 development cycle introduced many large code overhaul projects. Most of these were to lay the groundwork for future fixes and optimizations. The final release is yet another leap in performance over the already impressive 2.10 and 2.11 releases. A full changelog can be viewed here, but some highlights include: The Dark Mod 2.12 is a major step forward for mission designers! The culling system has been extensively overhauled to ensure that your CPU and GPU are not wasting resources rendering unseen geometry, lights, and shadows. Some of our best map optimization experts have achieved similar performance gains to what this new culling system does but it is a rare skill and we have even managed to improve performance on missions that were generally regarded as “well optimized”. Mission authors both new and old can follow standard mapping practices with no need to dive deep into sophisticated optimization techniques even for some pretty challenging scenarios such as wide open areas and long views. Players will immediately notice many missions that have made their system struggle with FPS now may be running much more smoothly! Smoother controls for players! Also during the 2.12 development cycle, work has been done to make controls more seamless and accessible. Frob can now use hold or click actions to use items. Once you get used to the mechanic, it will be hard to go back to using a separate “use key”. Mantling is now smoother, faster, and less prone to cause the player to clip through geometry. Leaning is now more subtle and less prone to cause motion sickness. To reduce the tedium of shuffling knocked out AI around to search for loot, you can now configure TDM to automatically loot any frobbed AI. A special thanks must go out to community member Geep! Over the course of 2.12 development, Geep has created subtitles for nearly all AI barks along with developing testing tools and procedures for this gargantuan task! You can see these changes in action by changing the Subtitles setting to “On” ( rather than “Story” ) on the Audio settings page. Geep also provided substantial feedback for our GUI and subtitle design process and edited font data to improve text quality overall. Datiswous has complimented the massive work by Geep to create AI bark subtitles by creating mission story subtitles for a large number of missions. Thank you! Turrets are now natively supported in The Dark Mod and can be paired with Security Cameras! Finally, the nasty 2.11 bug that caused AI to allow arrows to pass through them at certain angles was fixed by Joebarnin! Your assassin style play-throughs should be far less frustrating. See also, our 2.12 Feature discussions: To UPDATE, simply run the tdm_installer.exe file in your darkmod folder. Note that tdm_update.exe is no longer supported, but you can download the new installer from the Downloads page if you don’t have it yet. Please be aware that old saved games will not be compatible with 2.12, so finish any missions you might be in the middle of first! Also, some missions created prior to 2.12 may need to be updated so they will be playable in 2.12. Use the in-game mission downloader to check for updates.

Hello! Tracking down information on software and plug-ins that work with D3 / TDM can be a tough. So I have created a thread here where people can post what software/ plug-ins/ tutorials or other references they've had success or failure with in TDM. 3DS MAX 2013 64bit .ase - Default .ASE model exporter works. However you have to open the .ase file in text edit and manual change the *BITMAP line on each material to read something like: "//base/textures/common/collision" which allows the engine to read the correct material path. md5.mesh / animation - Beserker's md5 exporter/importers for 3dsmax. http://www.katsbits.com/tools, Importing and exporting works. The model must be textured, UV'd, with a skin modifier attached to the bones to export. PM me (Kingsal) for help with this. Imported models using the script will not be weighted appropriately, so this is not recommended if you are simply trying to edit existing tdm content. (Use blender instead) MAYA 2011 32bit md5.mesh - So far I've not had any luck with Maya 2011. I am using Greebo's MayaImportx86 for Maya 2011. I've got the importer working however I get a "Unexpected Internal Failure(kFailure)" and the import fails. This could be due to something finicky in Maya that I am not doing correctly. Will keep trying.. Blender 2.7 about - Blender is commonly used and pretty well supported on the forums/ wiki. Various versions may work as well - https://www.blender.org/download/ md5.mesh / animation Blender MD5 importer/exporter (io_scene_md5.zip): https://sourceforge.net/projects/blenderbitsbobs/files/ Sotha's guide Blender Male/ Female rigs by Arcturus - Here Edit by Dragofer: more links found in this post.

I have just released a new utility, "refont", as an open-source, partial-successor of the traditional "q3font", used to tweak the spacing and placement of TDM's bitmap font characters. For the whole story, see the new wiki page Refont.

I have just released a new utility, "refont", as an open-source, partial-successor of the traditional "q3font". For the whole story, see the new wiki page Refont. (I'm gonna post this in a few forum threads. Don't hate me for that.)

Hi. Just playing this for the first time. At the vault entrance I got the guard to chase me back around the main basement. And slipped into the vault before he returned. When I finished in the vault I came out through the big round vault door. And then found that the normal door leading to the vault entrance - where the guard sat - was closed. Is this meant to happen? And is there anything I can do to re-open it?

I have just released a new utility, "refont", as an open-source, partial-successor of the traditional "q3font". For the whole story, see the new wiki page Refont.

The devs didn't title this thread, and @datiswous said they're attempting to mislead people by using Russell's name and a retro style to make it resemble Thief, which is cynical. I grew up on forums like I'm sure anyone who likes a game from '98 did. I actually left the Discord immediately after joining it because it was more off-topic doom-posting than anything relevant to the mod. I thought the forums might be better, but it's mostly just grown men yelling at clouds and telling strangers how mature they are, and a few brave souls actually developing anything. Depressing place, I'll just stick to enjoying new missions every 6 months without an account.

True, but, 1. this thread is called "Western stealth FPS with Stephen Russell", and, 2. nothing you said changes anything for me. The gameplay still doesn't look like something I'd enjoy. And, if you really think this forum is cynical, then you don't visit forums much. Actually, the majority of the users are are pretty mature, unlike in other forums.

We didn't make the holidays (such a busy time of year) so here's a New Year's gift, an unusual little mission. Window of Opportunity Recover an item for a regretful trader out in a wilderness setting, and discover more! Available within the in-game mission downloader or: Download: http://www.thedarkmo...ndetails/?id=79 Alternative: https://drive.google...WTMzQXZtMVFBSG8 Some unorthodox gameplay on regular/ghost difficulties. (Arachnophobes might prefer short mode...) Please expect to need your lantern in regular and ghost modes! Short ("easy") mode is a smaller map, so if you are looking for areas others reference below, or 100% of the loot, you'll need to play on another mode. I wanted to create my first mission before I became influenced by too many others' ideas, and limited myself to what has been done before. As such, this mission is not set in a city/town, and has some features that are likely to be provocative. There's a section some really like, which others don't, either way I kept it short to not last too long. That being said, I hope you do find it fun! :-) Special thanks to those who provided valuable testing and feedback: Goldwell, Kyyrma, plotzzz, 161803398874989, PPoe & Bikerdude (who also contributed a sound). (Please remember spoiler tags to not expose things meant to be discovered by playing.) Like so: [spoiler]secrets[/spoiler] If you are having trouble finding the main objective, here's what to pay attention to in the mission for hints: There is a spot it's possible to get stuck on the ground in the corner by the cliff/rockfall where there's a rope laying on the ground, please take care if you poke around there!

New script for mappers: my flavour of a fog density fading script. To add this to your FM, add the line "thread FogIntensityLoop();" to your map's void main() function (see the example in fogfade.script) and set "fog_fade" "1" on each foglight to enable script control of it. Set "fog_intensity_multiplier" on each info_location entity to change how thick the fog is in that location (practically speaking it's a multiplier for visibility distance). Lastly, "fog_fade_speed" on each foglight determines how quickly it will change its density. The speed scales with the current value of shaderParm3, using shaderParm3 = 1000 as a baseline. So i.e. if shaderParm is currently at 1/10th of 1000, then fade speed will be 1/10th as fast. Differences to Obsttorte's script: https://forums.thedarkmod.com/index.php?/topic/14394-apples-and-peaches-obsttortes-mapping-and-scripting-thread/&do=findComment&comment=310436 my script uses fog lights you created, rather than creating one for you. Obsttorte's script will delete the foglight if entering a fogfree zone and recreate it later more than one fog light can be controlled (however, no per-fog-light level of control) adding this to the map requires adding a line to your void main() script, rather than adding an info_locations_settings entity with a custom scriptobject spawnarg in my script, mappers set a multiplier of fog visibility distance (shaderParm3), while in Obsttorte's script a "fog_density" spawnarg is used as an alternative to shaderParm3 smaller and less compactly written script fogfade.scriptfogfade.map

I dom't use it, i found it here with the filter set to OpenSource. the TOS and PP isn't excluding for an OpenSource app, if they use ads mean that they also need to pay an server for this online service. OpenSource is not synonymous with free either, perhaps after the beta phase it is no longer free, so perhaps you can take advantage of the fact that it is still free to create a series of textures that can be used or search another one in Futuretools. AI generated textures and assets, by definition, don't have any copyright, so you can use them as you want. https://www.futuretools.io/?pricing-model=free|open-source&tags-n5zn=gaming

Suggestion - Improving the Map If a fan mission has a map, it would be nice if the map wasn't a generalized after-thought, but a more detailed and real-time map showing where you are when you open it. I know this is asking a lot, and it would probably take a huge chunk of programming time, but it would be nice to know where you are along your travels. Of course, this takes away some of the mystery and suspense of investigating unknown territory, but it doesn't have to be there, just in some circumstances. I can't do without GPS in my vehicle, especially when I'm in a different city. I think this reflects on my suggestion.

The Thief2 FM "Mission X" was structured like that. But from the perspective of someone making or using a multiplayer system, it should be as general as possible so mappers can make whatever set-up they want for their FM, like that, or leave it open to the players to play it however they want. I think one way for the system to work most basically is have a coop mode (shared objectives, loot, scripts, etc.) and a "thieves vs. guards" mode (separate objectives, tracking loot count & capture count; it should probably be set up like the old Thievery mod) and those are pre-made so a mapper can just turn one on and tweak some things. Those are the two most popular MP cases for this game. But then if they want to, mappers could micromanage the parameters if they want to make their own mode, and the system should facilitate that. That was my thinking. But I think coop is the big one for us, since all of the FMs will already be set up for that, and that's the way I imagine it'd be most used. So that should come first.